Solving the instability of the docking station's splash screen transmission

What should we do to solve the flash screen and unstable situation after the dock is connected to the computer? It is generally the case that this is a problem when processing on the Cable side. So what are the reasons?

1. If the high-speed transmission does not meet the GEN1 standard, when the external display is connected, the video will have a splash screen and the transmission speed will be slow.

2, the quality of the plug is poor, the impact on crosstalk is particularly large.

3. When the wire is processed, the damage to the wire is too great.

4. Too much tin on the connector causes the contact to be short-circuited with other contacts, or too little will cause the cable welder or attenuation.

Chuangji

Know the reason, how do we solve it?

1. The raw material ? wire material has passed the GEN2 standard, and the connector has passed the GEN2 standard.

2. When confirming the plug, the project should be recognized in strict accordance with the requirements, using the same specifications of wire, the same length, the same processing method, different plugs for comparative analysis.

3, due to wire processing, it is inevitable to have a destructive effect on the wire, so when the wire material is incoming, it is necessary to leave a certain space for wire processing.

4. Automatic welding must be used when welding the wire to ensure the smoothness of the tin point and reduce the loss and attenuation of the high frequency signal.

5. Immediately consult Chuangji Chungkey. The best quality, quality service, your choice.

Chuangkey Chungkey, a docking station expert, allows you to experience a more high-definition, stunning visual feast; with powerful chips, your product transmission is more stable and compatibility is better. Creative docking station: For your satisfaction, we are really worried. If you are interested in or have doubts about our foundation dock, you are welcome to contact us at 0769-82207610!